Report
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ad43e6c8-74ed-415c-8e4e-8af8ee11daa5?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ad43e6c8-74ed-415c-8e4e-8af8ee11daa5?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b4033173-b124-4298-8468-73cadb032522.png)
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cb9d6887-625c-4eb8-8237-d666a2aa3ad1.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Recipe Card: Stephanie's Granola on Wooden Board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c2fed9ed-a1ba-4219-bd06-776eac23240a.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Recipe Card: Stephanie's Granola on Wooden Board
Instruction
RecipeCardWOoDen
.xcs
Application scenario
Laser processing (25min)
Machine & module
xTool F1 Ultra
20WMaterial used
4 mm Banboo compact wood
Dollar Tree Wooden cutting board.
19
539
Information
Simple recipe wooden card. Great for a gif idea or Item to add to your gift shop.
Instruction
1
Step1
Preview
* Purchase: Acquire a bamboo particle board (compact wood) measuring approximately 6 inches by 8 inches from a dollar store. Note that sizes may vary.
* Clean: Thoroughly clean the bamboo board.
* Engrave (First Pass): Use a laser engraver to engrave the desired design onto the board. Set the laser power between 80% and 90%. Experiment within this range to achieve the desired darkness.
* Score (Second Pass): After engraving, perform a scoring pass over the engraved design. This will further enhance the design and make it “pop.”
* Time Estimate: The entire process, including design creation/typing and testing, should take approximately 25-30 minutes.
Comments
