Personalized photo frames with two pictures and own text

Open the “.xcs” file in xTool Creative Space. There are three workspace you can select from

• 2024 - 2025
  fixed dates for 2024/2025 with hearts in the center.
• 2025 - 2026
  fixed dates for 2025/2026 with hearts in the center.
• Shapes
  loose shapes for arbitrary dates or words with a generic circle in the center for a custom icon.

They are all set for two pictures with dimensions `10x13 cm` cut with an angle on either side.

If you want to have a customized the dates/words, you may use the “Shapes” canvas to do so.

Just type in whatever you want to have written (maybe adjust the size) and klick on “Outline”. A window will popup — as a reference, I used 4mm here.

Once the outline had been created, make sure to remove any dent's into the picture area, so there is a visible overlap with the newly created outline and the raw-border.

To have a continuous cut later, you now have to unite the two shapes. To do so, you may open the layer panel and select both layers before going to the top edit bar and click on the “unite” button.

Place the pictures inside the frame and glue all pieces together so they won't fall out. 

To be able to interchange the pictures easily you can also add another border in between with a cutout on top.

Material

• Wood glue [Hornbach.de, Amazon.de*]

Place the picture inside the frame - the laser engraved part is to have the picture perfectly fit between the sheets.

Glue the two pieces together and let it dry over night. Afterwards you can hang it on the wall - hopefully next to some more - to get a glance over the year in one go.

Enjoy! :)

All links with an asterisk (*) are so-called affiliate links. 
I participate in the Amazon Affiliate Partner Program, which allows a small commission on purchases made if you follow the links - no additional costs are involved for you!