Cuadro imán aguacates enamorados

To design this beautiful mini magnet painting for Valentine's Day you will have to follow the following steps: 

• We will insert a heart 106 mm wide, make a copy. 
• In one of them we generate its outline of -6. Select both shapes and click on combine and subtract in superimposition. 
• We are going to insert an image of two avocados together that we like. We are going to generate their contour in 1. 
• We are going to make the face (eyes and mouth) for this we will insert the pill shape, generate their contour in 0.5, select both shapes and click on combine and subtract in superposition. Now we will insert a rectangle and place it at the bottom, observing that the part at the top is in the shape of eyes. Select both forms and click on combine and subtract. We already have the desired shape so we will make 5 copies. If it is easier for us, we can place it already as a face and group them, in this way, if we have to move it it will move together and not one by one. We select them to engrave. 
• Now we are going to insert some hearts simulating the avocado pit. These will measure approximately 15 mm. We will select one to mark and the other to cut. 
• Now we are going to place the frame on the base and thus we will see the space that we will have left to put the avocados and the text we want. We make a copy of the outline of the avocados and place it on the base, select to mark. 
• We insert text and write the phrase we want, I have written "You complete me" and I have used the typography "Shalinar". We hit it to record. We move the frame again. 
• Inside the frame we will place the avocados to cut and insert hearts of different sizes that will serve us to decorate later. 

We turn on the Xtool, insert the material we want to work with, in this case a 3 mm thick MDF board, adapt the height of the laser and check the parameters. We hit start and let the machine do its job. 

Once we have all the pieces, we are going to paint and glue them. 

I have painted with watercolors because this way I give it a touch of color without covering the engravings. 

Once we have all the pieces painted to taste we are going to glue them, for this we will start with the frame and then everything that goes inside. When we finish we only have to glue the magnet on the part of the painting. 

rear. I glued it with glue. 

To finish I like to give it a little matte varnish spray.