Report
![[Laser cut and engrave] xTool M1 Test Grids Cutting and Engraving Digital Download](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/980515f0-91a2-4e93-ab1c-1594c73bc833?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
xTool M1 Test Grids Cutting and Engraving
Instruction
parametertest
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool P2
55WCompatibles · 12
Material used
1/8"(3mm) Walnut Plywood
184
1039
Information
I made these because it is very useful to know how to use your machine, and its a easy project. It is so helpful, so please try it out.
Instruction
1
Step1: How to use it
Preview
I decided to make these test grids, because it is so helpful to kinow what setting to use. I hope everyone can enjoy the pleasure of knowing what you want for your settings.
- To make this first I uploaded a square and created a grid array.
- Next I set each box in the array to a slightly different setting.
- I did this for cut, and engrave.
- Next I cut the pieces out.
- Now you have a perfect test piece.
- If you want, you can also engrave your name, or a picture on you test piece.
Use the piece when your not sure what parameters to use. Its very useful!
Enjoy.
Comments
