Incense Stick Box with drawer and holder 3mm

Incense Stick Box - Assembly Instructions

Materials Needed:

• Laser-cut parts from the provided file
• Sandpaper (optional, for smooth edges)
• Wood glue (only if needed for loose joints)
• Clamps or rubber bands (optional, for holding pieces in place while drying)

Step 1: Preparing the Pieces

• Ensure all pieces are cut cleanly from the material.
• Lightly sand edges if needed to remove burn marks or rough spots.
• Identify each part using the labels provided in the file.

Step 2: Assembling the Outer Box

• Start by laying out the four side panels and the base.
• Fit the interlocking edges together, ensuring all joints align properly.
• Press the pieces together firmly to create a snug fit.
• If joints feel loose, apply a small amount of wood glue before securing them.
• Attach the top panel with the ventilation holes.
• Set aside to dry if glue was used.

Step 3: Assembling the Inner Sliding Drawer

• Lay out the drawer’s bottom piece and its four sides.
• Connect the side panels to the base, aligning the interlocking joints.
• Press the pieces together tightly to ensure a strong fit.
• If needed, use glue for extra stability.
• Check that the drawer slides smoothly into the outer box.

Step 4: Final Checks

• Ensure all joints are secure and the structure is stable.
• Test the sliding mechanism to confirm smooth operation.
• Insert incense sticks into the drawer and test the holder functionality.
• Enjoy your handcrafted incense stick box!