Report
![[Laser cut and engrave] Bracelet Jig](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/03f7d533-1055-4d23-8fdb-9048aab3a3aa.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Bracelet Jig](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Bracelet Jig
Instruction18KGoldPVDStainlessSteelBlankIDCurvedBarBraceletBRJ9044
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
53
584
Instruction
1
Step1
The following jig is to be used with 18K Gold PVD Stainless Steel Blank ID Curved Bar Bracelet / BRJ9044. These bracelets are about 40 mm by 8 mm.
Step 1: Cut files from 3mm basswood or similar material.
Step 2: Use wood glue to adhere the pieces together or use the clips to keep them in place.
Step 3: Engrave bracelets by placing them into the designated slot. If using the P2S use a marking spray before using the engrave setting.
Comments
