Report
![[Laser cut and engrave] Wooden Christmas Trees with Deer and Snowflake Decorations](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cbe0dae2-cf72-483f-b567-3c8cfc3bd129.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Christmas Trees with Deer and Snowflake Decorations
Instruction
ChristmasTree2
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
10WCompatibles · 9
Material used
1/8"(3mm) Ash Plywood
135
1275
Information
This is a beautifully crafted wooden decoration featuring a minimalist Christmas tree. Inside the frame, there's an intricately cut snowflake, a smaller tree, and a reindeer leaping gracefully. Adding a personalized touch at the bottom with the desired name.
Instruction
1
Step1: Cut the pieces
Use the laser engraving machine to precisely cut the individual components from a 3mm wooden sheet. Ensure the settings are calibrated for clean edges.
2
Step2: Prepare the Pieces
Gently sand any rough edges on the cut pieces to ensure a smooth finish.
3
Step3: Assemble the Design
- Apply a small amount of wood glue to the edges of the smaller components (e.g., the snowflake, small tree, and reindeer) and attach them to the triangular frame.
- Allow the glue to dry for a few minutes to secure the pieces in place.
4
Step4: Attach the Base
- Insert the bottom of the triangular frame into the slot on the circular base.
- Apply wood glue for added stability.
Comments
