Report
![[Laser cut and engrave] Wooden bunny cutouts for Easter decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d96604f7-fc32-4911-ab96-37141ab0b4f4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden bunny cutouts for Easter decoration](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden bunny cutouts for Easter decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d96604f7-fc32-4911-ab96-37141ab0b4f4?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden bunny cutouts for Easter decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/83cb0aec-896a-40bb-80ef-964eaed200b0.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Easter-Bunny front&back
Instruction
Hase3
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
27
1033
Information
Instruction
1
Step1
After the two rabbits have finished the front and back without moving anything, turn both rabbits and put them in the respective recess. Now in the second pass, remove the cutting and leave only the engraving in it. So the bunnies get the front and back sides too.
If you use several rabbits, always in pairs, follow the same process as above.
Have fun with it.Comments
