Report
![[Laser cut and engrave] Walking With Dad Footprints Design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/fe912195-eb18-4858-8e04-f398a2481fc8?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Walking With Dad Footprints Design](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Walking With Dad Footprints Design
Instructionwalking
.xcs
Show 1 more
Application scenario
Laser processing (25min)
Machine & module
xTool S1
20WMaterial used
MDF
31
706
Instruction
1
Step1: Designing
Preview
Preview
Preview
4 More images
- With a set of foot prints from AImake this project takes on a whole new meaning.
- With having the image already in the SVG format the foot prints only needed to be sized.
- Once the size was set the foot prints were laid out in a walking pattern.
- Having the dad's feet walking along side a child.
- This was done by makin the child's foot prints smaller
- The pattern for the child were a few more feet.
- Along the top wording was added for the occasion
- Once this was all in place a border was created with a rounded rectangle.
- Settings were adjusted to be engraved then cut and it was then sent off to be processed.
- Once the project was finished in the machine the surface was wiped off and was hung to be enjoyed.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.