![[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey](https://storage-us.atomm.com/resource/xart/result/218859/437aba22-3f7b-42d1-a9a6-a24577291e53.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Wildlife Slate Coaster 4 Pack
Instruction
Instruction
Step1
Place the 4X4 stone coasters onto the honeycomb insert.
Step2
Move your crosshairs over the center of the coaster and mark your distance using the auto-measure feature.
Step3
Mark your working area using the rectangle selection and moving the crosshairs to two opposite corners, repeat for the next 3 coasters.
Step4
Import the file or SVG and resize it as needed for your material. Note the image is inverted for a cleaner finished project on the stone.
Step5
Adjust settings to desired power/speed.
Step6
Run the project- usually around 10 minutes time each, 40 minutes with the included settings for the 4 pack. TIP- place the coasters close together on the honeycomb to avoid lost time in laser travel.
Step7
Finish with a light coat of mineral oil or clear coat to make the engraving really stand out.
