Report
![[Laser cut and engrave] A tray of sweet Santa (slate tray)](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9b853a5b-9623-4377-b8dd-bc8b64a4381d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] A tray of sweet Santa (slate tray)](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
A tray of sweet Santa (slate tray)
Instructionardoisenoel02
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool S1
40W, 2WCompatibles · 13
Accessories
xTool S1 1064nm Infrared Laser Module
xTool S1 Honeycomb Panel
Material used
Rock
97
748
Information
A tray of sweets Santa with lot of gifts (slate tray).
I used this slate : https://www.action.com/fr-be/p/3002322/plateau-ardoise-absolu-chic/
Instruction
1
Step1: Start you xTool Creative space
Start XCS
2
Step2: Open project
Go to Files -→ open project
3. select ardoise noel 02.xcs in your drive
3
Step3: Select french or English
4
Step4: place slate tray into the machine
place slate tray into the machine
5
Step5: set focus
Set Focus
6
Step6: Check Parameters
Check parameters - I used the predefined parameters by selecting Rock Coaster.
7
Step7: Start Engraving
Start Engraving
8
Step8: remove from machine
remove from machine.
Comments
