Report
![[Laser cut and engrave] Personalized Christmas tree ornament with name Julia](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4ed03b5d-d220-48d9-b52f-2bbb47637ff9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized Christmas tree ornament with name Julia](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Personalized Christmas tree ornament with name Julia](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4ed03b5d-d220-48d9-b52f-2bbb47637ff9?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized Christmas tree ornament with name Julia](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2815d295-76ab-4578-af3b-8493bc27786b.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Personalized Christmas tree ornament
Instruction
xmastreeornament
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool D1 Pro
20W
xTool M1
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
232
1351
Instruction
1
Step1: XCS
Preview
red is cut
green is engrave
tip: i didn't center the font because then it slips far to the right due to the J
2
Step2: bring together
Preview
Preview
attention the thin frame is very delicate
when I glued it, I fixed it with clamps because the thin frame causes the wood to warp a little and it doesn't lie flat
Comments
