Report
![[Laser cut and engrave] Current River Kid wooden engraved plaque with bridge and trees](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e50099ff-f8b0-4207-9d98-ce3db5aa5165?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Current River Kid wooden engraved plaque with bridge and trees](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Current River Kid wooden engraved plaque with bridge and trees
Instructioncurrent
.xcs
Application scenario
Laser processing (25min)
Machine & module
xTool S1
20WMaterial used
3mm birch
glue
clear UV resin
blue foil paper
6
345
Information
This project is a 2 layer with resin filled river. This was made for someone from the area.
Instruction
1
Step1: Image And Lay out
Preview
- This project starts with an image of a famous bridge, it is sized and edited to include cuts for the water portion on the picture.
- By releasing the SVG of the image parts can be changed from engrave to cut
- Once the river or water area was changed to cut it could then have that area removed from the top layer
- When this layer is cut out the second layer receives the blue foil paper for color
- Once all glued together a clear UV resin is poured into the water area and hardened.
Comments
