Report
![[Laser cut and engrave] Wooden Pumpkin](https://image-res.xtool.com/ali-res/community/making/7f727d13-ac70-45db-b7bd-84862d5dfdd2/Wooden%20Pumpkin%20Image%201%20(2).jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Pumpkin](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Wooden Pumpkin
InstructionWooden Pumpkin
.xcs
Application scenario
Laser (30min)
Machine & module
xTool D1
5WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
126
1335
Information
I made this cute little pumpkin for my Halloween decorations!
Instruction
1
Step1: Cut out pieces for pumpkin
Preview
Preview
You are welcome to customise the design, such as resizing it.
2
Step2: Stick together with PVA glue
Preview
Preview
You can use any glue. I myself used Evo-Stik Wood Glue.
By the way, you can also invert the first layer if you want.
3
Step3: Sand down
Preview
This is optional, but I think it gives a rather nice finish.
4
Step4: Paint!
Preview
Preview
Again, this is optional. I like the wood texture, but you can colour this in with a Sharpie or paintbrush. You can make this the standard Orange and Black, but you can also make it any wacky colour combination you want!
Comments
