Report
![[Laser cut and engrave] Slide Extension Bottle Opener Jig](https://image-res.xtool.com/ali-res/community/making/1e492793-0080-4f8b-93c0-916f89e40007/Jig_Part%205.PNG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Slide Extension Bottle Opener Jig](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Slide Extension Bottle Opener Jig
SlideBottleOpener
.xcs
Application scenario
Laser (30min)
Machine & module
xTool F1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
300
3071
Information
This Jig will take 20 bottle openers. You will need the Slide Extension
1. Start with two 3mm plywood boards 400x115mm.
2. Note the position of the 2 blocks on the slide extension. Do your normal side extension setup.
3. Run the files I did the score for the engrave alignment first. Then I ran the cut job.
4. Glue the two boards
Comments
