Report
![[Laser cut and engrave] Intricate wooden coasters with Santa Claus engravings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9f4eb4ed-a2a3-494c-ac74-1121e7989403?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Intricate wooden coasters with Santa Claus engravings](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Santa Wooden Coasters
InstructionSantacoasters
.xcs
Application scenario
Laser processing (45min)
Machine & module
xTool S1
20WMaterial used
3mm birch
Beeswax sealer
266
1729
Instruction
1
Step1: Project Prep
Preview
- All 4 different images were from AImake
- All of them brought into XCS software
- Once in the software they are all sized
- A rectangle is created with a small radius on the corner so they are rounded and not sharp
- Each image from the set of 4 are engraved and cut to the same size with the created rounded square
- When the settings are adjusted the project is sent to the machine to be processed.
- This can be done 1 image at a time or all 4 at one time
- When finished the new engraved coasters are cleaned and then a good coat of beeswax is applied to seal them.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.