Report
![[Laser cut and engrave] Smiling reindeer illustration on a rectangular card](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/aa2462ca-4570-4c42-a8ce-89e3305d3dc2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Smiling reindeer illustration on a rectangular card](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Rudolph Mirror
Instructionrudolphmirror
.xcs
Show 1 more
Application scenario
Laser processing (300min)
Machine & module
xTool M1 Ultra
20WMaterial used
Acrylic mirror
Piant
52
863
Information
[Style] Line art
[Prompt] funny reindeer smiling
Instruction
1
Step1: Image Prep From AImake
Preview
Preview
- With the Aimake program a cute rudolph is asked for
- This image is then brought into xcs software and is adjusted to size and edited
- This project is engraving on acrylic mirror so it is no different than regular mirror that it gets engraved on the back side in reverse
- This image didn't need reversing but if lettering or words are added then they will need reversing.
- Once the image is ready to be engraved it is sent to machine to be processed.
2
Step2: Painting the image
Preview
Preview
Preview
- When the image is engraved on the back side of the mirror it is clear
- The area's that need red paint (the nose) gets red paint first, then once that paint is dry the second color is added.
- Repeat these steps based on the amount of different colors that are needed. Remember to only expose the area you want that color to be.
- Another tip is to not engrave mirror directly on the honeycomb, place a piece of wood between it and the mirror to engrave.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.