Pet Food Bowl Stand Laser Cut SVG - Wooden Raised Single Bowl Stand with Removable Ring & Spill Lip Tray 3mm Plywood DXF for xTool

ID 284549
Atomm Exclusive
Instruction
Files
Original files
AuthorP2 · 1/8"(3mm) Basswood Plywood
2
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 100 Credits
Tips for a great Make Profile →
Interlocking parts.

Cut to fit a specific material thickness. If you resize them or change thickness, run Resize slots in Studio first so they still fit together.

gift
231

Information

      Pet food bowl stand laser cut files for 3mm plywood: a 240 × 200 mm raised single-bowl stand, 120 mm tall, with a removable bowl ring that lifts out for washing and a base tray with a raised spill lip all round to catch spills.
    

Instruction

1

Step1: About this design

An original, evergreen, everyday pet piece: one simple plain-plywood stand that raises a single food or water bowl to a comfortable height, keeps the bowl from sliding, and catches the spills that end up on the floor with ordinary flat stands. The stand is deliberately simple — nine flat pieces, no text, no drawn artwork — but two details make it stand out: the bowl ring lifts out for washing, and the base tray carries a raised lip all round.

How the bowl sits: the top plate carries exactly one circular bowl opening (168 mm diameter, centred). The removable ring — a flat annulus, 180 mm outside, 150 mm inside — rests on the top plate around the opening (6 mm of bearing all round). Drop a bowl through the ring and the opening and its rim rests on the ring, held centred by the ring's inner edge. The bowl hangs into the 114 mm of clear space above the base tray, so bowls up to about 110 mm deep fit. Suits bowls with a rim diameter of 155–170 mm and a body up to 148 mm across. Measure your bowl before cutting: the rim must be wider than the ring's 150 mm inner edge and the body narrower than 150 mm.

How the ring works: unlike fixed-ring stands, this ring is not glued or jointed in. Lift it out by its inner edge, wash it, and drop it back on the top plate.

How the spill lip works: the base tray is ringed by four low lip panels, 15 mm tall — front, back, and two sides — jointed into the tray with tabs, leaving only 3 mm corner gaps where the lips meet. Kibble that bounces out and water that sloshes over the bowl edge land in the tray instead of on the floor.

Finished size: 240 mm wide × 200 mm deep × 120 mm tall (123 mm with the ring resting on the top plate); 3 mm plywood, 9 pieces: base tray 240 × 200, top plate 240 × 200 with one 168 mm bowl opening, 2 identical side panels 200 × 114, 1 removable ring 180 mm outside / 150 mm inside, 2 front/back lips 228 × 15, 2 side lips 186 × 15. No text, no drawn artwork, no extra cutouts. Material: 1/8 inch (3 mm) Basswood Plywood. Machine: xTool.

Kerf disclosure — please read before cutting: the Δk = 0.15 compensation is applied INSIDE the file geometry. Do NOT add a second kerf compensation in CAM before a test joint — a second compensation would make the joints loose. Kerf varies by machine and material batch, so test-cut one joint on scrap first and adjust from that single test if your fit differs.

Assembly: press the two side panels' bottom tabs into the base tray's side slots and their top tabs into the top plate's slots; press the four lip panels' tabs into the tray's lip slots; rest the ring on the top plate around the bowl opening; drop the bowl in.

Please note: the bowl itself is NOT included and is NOT a cut part — these files cut the stand only; use your own bowl sized as described above. Images are digital renders generated from the actual design files — not photographs. This design has been geometrically validated in software (dimensions, slot widths, minimum feature sizes, no self-intersections); test-cut one joint on scrap first to check fit on your machine before cutting the full set, since kerf varies by machine and material batch. Compatibility note: this design has NOT been tested by importing it into any CAM program and has NOT been physically cut; the checks performed are software geometry checks only (file format + geometry, including SVG/DXF agreement). The DXF version is undocumented, so compatibility with any particular program is not guaranteed.

Comments

You may also like

adaptateur de sortie fumée pour Xtool M2

smoke outlet adapter for Xtool M2

acotak
acotak
1
3
Desk Cable Grommet Tray Laser Cut SVG - Wooden Cable Pass-Through Tray with Drop-In Slot & Raised Lip - 3mm Plywood DXF for xTool
Atomm Exclusive

Desk Cable Grommet Tray Laser Cut SVG - Wooden Cable Pass-Through Tray with Drop-In Slot & Raised Lip - 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Toothbrush Holder Stand Laser Cut SVG - Wooden Bathroom Organizer with Toothpaste Slot and Removable Drip Tray 3mm Plywood DXF for xTool
Atomm Exclusive

Toothbrush Holder Stand Laser Cut SVG - Wooden Bathroom Organizer with Toothpaste Slot and Removable Drip Tray 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Bathroom Cotton Pad & Swab Organizer Laser Cut SVG - Wooden 2-Section Vanity Holder with Lift-Off Lid - 3mm Plywood DXF for xTool & Glowforge
Atomm Exclusive

Bathroom Cotton Pad & Swab Organizer Laser Cut SVG - Wooden 2-Section Vanity Holder with Lift-Off Lid - 3mm Plywood DXF for xTool & Glowforge

Art of Cnc
Art of Cnc
0
3
Plant Propagation Station Laser Cut SVG - Wooden 3-Vial Test Tube Holder with Adapter Rings and Drip Tray, 3mm Plywood DXF for xTool
Atomm Exclusive

Plant Propagation Station Laser Cut SVG - Wooden 3-Vial Test Tube Holder with Adapter Rings and Drip Tray, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
1
Wooden Kitchen Knife Block Laser Cut SVG - Slot-Together Knife Holder with Graded Slots and Pull-Out Base Tray, 3mm Plywood DXF for xTool
Atomm Exclusive

Wooden Kitchen Knife Block Laser Cut SVG - Slot-Together Knife Holder with Graded Slots and Pull-Out Base Tray, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Herb Planter Box Laser Cut SVG - Wooden Finger-Jointed Herb Trough with Drainage Slots, Handles & Removable Divider, 3mm Plywood DXF for xTool
Atomm Exclusive

Herb Planter Box Laser Cut SVG - Wooden Finger-Jointed Herb Trough with Drainage Slots, Handles & Removable Divider, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Wooden Bookends Pair Laser Cut SVG — Slot-Together L Bookends, Book-Weight Base, Front Lip, 3mm Plywood DXF
Atomm Exclusive

Wooden Bookends Pair Laser Cut SVG — Slot-Together L Bookends, Book-Weight Base, Front Lip, 3mm Plywood DXF

Art of Cnc
Art of Cnc
0
0
Wooden Garlic & Onion Keeper Laser Cut SVG — Ventilated Kitchen Storage Box with Lift-Off Lid, 3mm Plywood DXF for xTool
Atomm Exclusive

Wooden Garlic & Onion Keeper Laser Cut SVG — Ventilated Kitchen Storage Box with Lift-Off Lid, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Bathroom Cotton Swab Dispenser Laser Cut SVG - Wooden Countertop Dispenser, Bottom Slot, Sloped Ramp & Lift-Off Lid, 3mm Plywood DXF for xTool
Atomm Exclusive

Bathroom Cotton Swab Dispenser Laser Cut SVG - Wooden Countertop Dispenser, Bottom Slot, Sloped Ramp & Lift-Off Lid, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
3
3
Laser Cut Wooden Box

Laser Cut Wooden Box

klebrice
klebrice
12
159
Wooden Recipe Card Holder Stand Laser Cut SVG - Angled Kitchen Card Stand with Lip Ledge and Rear Spare Card Slot, 3mm Plywood DXF
Atomm Exclusive

Wooden Recipe Card Holder Stand Laser Cut SVG - Angled Kitchen Card Stand with Lip Ledge and Rear Spare Card Slot, 3mm Plywood DXF

Art of Cnc
Art of Cnc
0
0
Business Card Holder Stand Laser Cut SVG - Wooden Desk Card Display with Storage Well & Finger Scoop 3mm Plywood DXF for xTool
Atomm Exclusive

Business Card Holder Stand Laser Cut SVG - Wooden Desk Card Display with Storage Well & Finger Scoop 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Bread Box Laser Cut SVG - Wooden Finger-Jointed Bread Box with Vent Slots and Removable Crumb Tray, 3mm Plywood DXF for xTool
Atomm Exclusive

Bread Box Laser Cut SVG - Wooden Finger-Jointed Bread Box with Vent Slots and Removable Crumb Tray, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
2
Wooden Plant Pot Riser Stand Laser Cut SVG - Slatted Pot Stand with Slide-Out Drip Tray, 3mm Plywood DXF
Atomm Exclusive

Wooden Plant Pot Riser Stand Laser Cut SVG - Slatted Pot Stand with Slide-Out Drip Tray, 3mm Plywood DXF

Art of Cnc
Art of Cnc
0
0
Wooden Seed Packet Organizer Box Laser Cut SVG - 3-Compartment Seed Storage Box with Label Slots, Removable Dividers, 3mm DXF
Atomm Exclusive

Wooden Seed Packet Organizer Box Laser Cut SVG - 3-Compartment Seed Storage Box with Label Slots, Removable Dividers, 3mm DXF

Art of Cnc
Art of Cnc
0
0
Kitchen Utensil Crock Laser Cut SVG - 3 Compartment Utensil Holder, 3mm Plywood DXF for xTool
Atomm Exclusive

Kitchen Utensil Crock Laser Cut SVG - 3 Compartment Utensil Holder, 3mm Plywood DXF for xTool

Art of Cnc
Art of Cnc
0
0
Wooden Desk Drawer Pen & Gadget Tray Laser Cut SVG - 4 Graded Compartments with Phone Slot & Finger Scoop, 3mm Plywood DXF
Atomm Exclusive

Wooden Desk Drawer Pen & Gadget Tray Laser Cut SVG - 4 Graded Compartments with Phone Slot & Finger Scoop, 3mm Plywood DXF

Art of Cnc
Art of Cnc
0
0