Report
![[Laser cut and engrave] Wooden Plywood Desk Organizer with Tool Storage Slots](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/4b72b4c6-5b1d-4cf2-a794-95303502bc9d.png?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Plywood Desk Organizer with Tool Storage Slots](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/4b72b4c6-5b1d-4cf2-a794-95303502bc9d.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Plywood Desk Organizer with Tool Storage Slots](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/3fe6b068-238f-4331-82f9-2923f9c0a093.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Plywood Desk Organizer with Tool Storage Slots](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/15ec6e60-9172-415e-af17-4abb05d1e8b9.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Toothbrush Holder Stand Laser Cut SVG - Wooden Bathroom Organizer with Toothpaste Slot and Removable Drip Tray 3mm Plywood DXF for xTool
ID 284485
Files

Original files
AuthorP2 · 1/8"(3mm) Basswood Plywood
2
2

Preview

Preview

Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 100 Credits
Tips for a great Make Profile →Cut to fit a specific material thickness. If you resize them or change thickness, run Resize slots in Studio first so they still fit together.
209
Information
Toothbrush holder stand laser cut files for 3mm plywood: a compact 130 × 90 mm bathroom stand, 110 mm tall, with 4 toothbrush holes, a toothpaste-tube slot, and a removable drip tray that slides out for emptying.
An original, evergreen, everyday bathroom essential: a plain-plywood toothbrush stand whose drip tray is removable — it slides in and out between the side panels on top of the base plate, so drips that run down the brush handles collect on the tray instead of pooling on the counter, and when it needs cleaning you pull it out by its semicircular finger notch, wipe it, and slide it back. Nothing is glued, nothing is fixed, and there is no cup to tip over.
Finished size: 130 mm × 90 mm footprint × 110 mm high; 3 mm plywood, 5 pieces. The top plate carries exactly 4 round toothbrush holes (20 mm diameter) and 1 rectangular toothpaste-tube slot (40 × 14 mm) for a flattened tube end. Brush handles hang through the holes with 101 mm of clearance above the drip tray.
Kerf disclosure — please read before cutting: the Δk = 0.15 compensation is applied INSIDE the file geometry. Do NOT add a second kerf compensation in CAM before a test joint — a second compensation would make the joints loose. Kerf varies by machine and material batch, so test-cut one joint on scrap first and adjust from that single test if your fit differs.
Images are digital renders generated from the actual design files — not photographs. This design has been geometrically validated in software (dimensions, slot widths, minimum feature sizes, no self-intersections); test-cut one joint on scrap first to check fit on your machine before cutting the full set, since kerf varies by machine and material batch. Compatibility note: this design has NOT been tested by importing it into any CAM program and has NOT been physically cut; the checks performed are software geometry checks only. The DXF version is undocumented, so compatibility with any particular program is not guaranteed.
Comments
License
This work contains AI-generated content.
Related Project
You may also like

Bathroom Cotton Swab Dispenser Laser Cut SVG - Wooden Countertop Dispenser, Bottom Slot, Sloped Ramp & Lift-Off Lid, 3mm Plywood DXF for xTool
3
3

Laser Cut Wooden Box
12
159

Wooden Garlic & Onion Keeper Laser Cut SVG — Ventilated Kitchen Storage Box with Lift-Off Lid, 3mm Plywood DXF for xTool
0
0

Bathroom Cotton Pad & Swab Organizer Laser Cut SVG - Wooden 2-Section Vanity Holder with Lift-Off Lid - 3mm Plywood DXF for xTool & Glowforge
0
3

Herb Planter Box Laser Cut SVG - Wooden Finger-Jointed Herb Trough with Drainage Slots, Handles & Removable Divider, 3mm Plywood DXF for xTool
0
0

Plant Propagation Station Laser Cut SVG - Wooden 3-Vial Test Tube Holder with Adapter Rings and Drip Tray, 3mm Plywood DXF for xTool
0
1

Kitchen Spice Jar Caddy Laser Cut SVG - Wooden 4-Jar Carry Caddy with Cut Handle Slots, Dividers & Finger Scoops, 3mm Plywood DXF for xTool
0
3

Stackable Box Template | 30x17x17 cm | 3mm Plywood Organizer
23
184

Pet Food Bowl Stand Laser Cut SVG - Wooden Raised Single Bowl Stand with Removable Ring & Spill Lip Tray 3mm Plywood DXF for xTool
0
0

Desk Pen Cup with Divider Laser Cut SVG — Wooden Pen Holder with Removable Divider, 2 Compartments, 3mm Plywood DXF
0
1

Sunglasses & Watch Holder Stand Laser Cut SVG - Bedside Dresser Organizer with 2 Stepped Rails & Removable Watch Bar - 3mm Plywood
0
0

Playing Card Box Laser Cut SVG - Wooden Finger-Jointed Card Box with Sliding Lid, Score Pad Slot and Pencil Rest, 3mm Plywood DXF for xTool
0
6

Desk Valet Tray Laser Cut SVG - Wooden Entryway Catch-All Tray with Coin Well and Key Slot, 3mm Plywood DXF for xTool
1
1

Bathroom Soap & Razor Caddy Laser Cut SVG - Wooden Soap Dish with Drainage and Raised Razor Dock, 3mm Plywood DXF for xTool
0
0

Laser Cut Wooden Crate SVG | Storage Box 20x15x10 cm | 3mm Plywood Organizer
28
228

Business Card Holder Stand Laser Cut SVG - Wooden Desk Card Display with Storage Well & Finger Scoop 3mm Plywood DXF for xTool
0
0

Kitchen Utensil Crock Laser Cut SVG - 3 Compartment Utensil Holder, 3mm Plywood DXF for xTool
0
0

Desk Cable Grommet Tray Laser Cut SVG - Wooden Cable Pass-Through Tray with Drop-In Slot & Raised Lip - 3mm Plywood DXF for xTool
0
0


