Report
![[Laser cut and engrave] Wooden Headphone Stand Display Holder](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/ac5adca6-8cf7-4b86-abe8-9124abafb1d8.png?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Headphone Stand Display Holder](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/ac5adca6-8cf7-4b86-abe8-9124abafb1d8.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Headphone Stand Display Holder](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/3c2dad13-1691-46e1-942b-56e6b8cac634.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Headphone Stand Display Holder](https://storage-public.atomm.com/xtool/community/attachment/xtool-community/da39ebfc-25c1-4698-837a-5d245e39ab3f.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Countertop Paper Towel Holder Laser Cut SVG - Wooden Kitchen Roll Stand with Finger Tear Notch, 3mm Plywood DXF for xTool
ID 284156
Files

Original files
AuthorxTool · 1/8" (3mm) Basswood Plywood
2
2

Preview

Preview

Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 100 Credits
Tips for a great Make Profile →Cut to fit a specific material thickness. If you resize them or change thickness, run Resize slots in Studio first so they still fit together.
1
210
Information
Countertop paper towel holder laser cut files for 3mm plywood: a free-standing wooden kitchen roll stand on a weighted double-layer round base, with a finger/tear notch in the base rim that lets you hold the roll steady with one hand while tearing a sheet with the other.
Finished size: 180 mm diameter base × 262 mm tall. 4 pieces, cut from 3mm plywood, slot-together design. Fits standard rolls up to 250 mm tall with core inner diameter ≥ 38 mm. Finger/tear notch detail: one semicircular 12 mm notch per base disc, aligned through the 6 mm stacked base.
Images are digital renders generated from the actual design files — not photographs of a finished physical piece. The holder is shown empty; no roll is included.
Before cutting the full set, test-cut one joint in your 3mm plywood to check the slot fit, as plywood thickness can vary.
Comments
License
This work contains AI-generated content.
You may also like

Wooden Napkin Holder Laser Cut SVG - Sliding Follower Napkin Stand, 3mm Plywood DXF for xTool
0
0

Freestanding Towel Ring Stand Laser Cut SVG — Open-Top C-Ring Hand Towel Holder, 3mm Plywood DXF for xTool
1
0

Mug Tree Stand Laser Cut SVG - Wooden Coffee Mug Holder with 6 Staggered Peg Hooks, 3mm Plywood DXF for xTool
0
0

Wooden Chopping Board Stand Laser Cut SVG - Kitchen Board Holder with Graded Slots & Drip Groove, 3mm Plywood DXF for xTool
0
1

Headphone Stand Laser Cut SVG - Slot-Together Wooden Headphone Holder with Base Tray, 3mm Plywood DXF for xTool
0
0

Bathroom Cotton Swab Dispenser Laser Cut SVG - Wooden Countertop Dispenser, Bottom Slot, Sloped Ramp & Lift-Off Lid, 3mm Plywood DXF for xTool
3
3

Stand Slate 30x20cm
41
353
Egg cup
3
8

15cm wooden presentation stand for plate or frame
5
66

Laser Engraved Wooden Phone Holder Stand for Desk
11
140

Wooden stand for displaying plates or frames
10
247

3 mm Mdf support
2
106

7" Stand for Portraits
2
3
$3.99
$3.99
$7.98
Credits399
Gift stand holder, phone organizer, laser cut design. Laser cutting template, birthday gift, desk display. Office accessory, mobile holder.
5

Mini Chevalet pour carte de Voeux
0
6

$3.49
$3.49
$4.99
Credits349
Wooden Arch Jewelry Display Stand with Hooks
0

3 mm Mdf support
1
32

Kitchen Tablet & Recipe Book Stand Laser Cut SVG - Adjustable 3-Angle Wooden Cookbook Holder with Page Tabs, 3mm Plywood DXF for xTool
0
1


