Report
![[Laser cut and engrave] testing for xart, Bitmap Modes, and tracing](https://image-res.xtool.com/ali-res/community/making/c824d1c7-ad90-4415-bcf9-7fbe64dda969/Xart%20project.PNG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] testing for xart, Bitmap Modes, and tracing](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
testing for xart, Bitmap Modes, and tracing
InstructionEngraving test for functions
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
196
4637
Information
XCS allowed to choose 7 kinds of bitmap moods.
I tried to look at the different results of Bitmap modes.
I got this design from Xart AI image generator.
Instruction
1
Step1: create design File with Xart AI
Preview
Preview
add text promp to text box.
Choose silhouette.
generate.
I got the 2 images and I choose.
then import to camvas.
2
Step2: Trace the images
Preview
Trace the image to get the vector file.
Adjust the setting as you want.
see my setting in my image.
3
Step3: create different modes
Preview
make 7 copies and change each files to different modes.
add text of each file's mode.
4
Step4: Engrave the files
Preview
engrave all images by the setting as I added.
5
Step5: Check engraved image for how different
Preview
Preview
Preview
Preview
All done.
You can see what is different in 7 different kinds of bitmap mode.
Thank you
Comments