Christmas Money Holder Ornaments Laser Cut SVG, Bauble Tree Stocking Cash Gift Holder, 3mm Plywood DXF for xTool & Glowforge

Files
Original files
AuthorxTool · 1/8"(3mm) Basswood Plywood
2
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
1
304

Information

      Christmas Money Holder Ornaments Laser Cut SVG — Bauble, Tree & Stocking Cash Gift Holders. An original set of three flat Christmas ornaments that turn a cash gift into the present itself: fold a banknote, thread it through the ornament's cash slot, and hang it on the tree. Each ornament is a single flat piece — no assembly, no glue, no interlocking parts — cut from 3 mm plywood, with 'Merry Christmas 2026' engraved (not printed) from open-license font outlines. Finished sizes: Bauble 100 mm diameter; Christmas tree 100 mm wide x 118 mm high (stepped tiers + triangle top); Stocking 85 mm wide x 126 mm high (with cuff). All 3 parts fit on one sheet area of 340 x 126 mm — the included sheet layout is already nested. The cash slot (all 3 ornaments): a 70 x 12 mm through-slot. Fold a banknote to no more than 68 mm wide, thread it through the slot, and fold the ends back. Every ornament also has a 6 mm hanging hole at the top for ribbon, string or a hook, plus decorative cutouts (bauble: star + 2 dots; tree: 2 dots; stocking: foot star + 2 cuff dots). Material: 3 mm plywood (or 3 mm MDF / acrylic with the same settings). Kerf allowance Δk = 0.15 mm is applied consistently; this is a flat-cut set with no tab/slot mating joints, so every opening is a clearance opening sized far above the kerf. Cut vs engrave: in the SVG files, RED paths are through-cuts and BLUE paths are the engraved 'Merry Christmas 2026' lettering; in the DXF files the same split is layer CUT vs layer ENGRAVE. Do not cut the text paths through. Machines: xTool (D1 / P2 / M1), Glowforge, and any laser cutter or CNC that reads SVG/DXF. Files included: individual part files (3 parts x SVG + DXF), sheet_layout.svg / sheet_layout.dxf, ASSEMBLY.md, LICENSE.txt. Please note: the product images for this listing are digital renders generated from the actual design files — not photographs. What you see is exactly the geometry you cut: the cash-slot sizes and positions, the hanging holes, the star and dot cutouts, and the engraved lettering in the renders are the sizes and positions in the cut files. This design has been geometrically validated in software (dimensions, slot/hole sizes, minimum feature sizes, no self-intersections); cut one test ornament first to confirm the slot fit for your folded notes, the kerf and the engrave settings on your machine and material batch before cutting the full set.
    
Comments

You may also like