Report

Christopher Columbus Ships Pinta, Santa Maria, and Nina Wall Art

ID 282693
Atomm Exclusive
Instruction
Files
Original files
AuthorM2 · 1/8"(3mm) Basswood Plywood
3
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
5
187

Information

      Create a laser-cut project with this detailed design of the Nina, Pinta, and Sant Maria, perfect for basswood and other laser-friendly materials.

Each download includes both a laser cutout version and a laser engraving option, giving you more flexibility for your project. The design is provided in three file formats: XS, XCS, and SVG.

The sample shown was cut at approximately 8” x 10” which provides a great balance of size and detail. You can easily resize the design larger or smaller to fit your needs. For best results, keep in mind that making the design significantly smaller may reduce some of the finer details and cause certain areas to become thin or delicate.

    

Instruction

1

Step1

For this project, I used my xTool M2 Ultra with 20W laser with 3mm basswood and the recommended xTool settings: 100% power, 8 mm/s speed, and 100% air assist.

I secured the basswood using the magnetic clips and elevated the material slightly above the surface to improve airflow and help achieve a cleaner cut.

To protect the base of the M2 Ultra from laser marks and accidental cuts, I also place a sheet of black foil underneath the material. It works extremely well and adds an extra layer of protection to the laser bed during cutting.

Comments

Remixes