Report
![[Laser cut and engrave] Embossed Vintage Picture Frame](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/27e12671-8455-45be-9e08-91be98f43760?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Embossed Vintage Picture Frame](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Embossed Vintage Picture Frame
InstructionPictureframeEmbossment
.xcs
Application scenario
Laser processing (240min)
Machine & module
xTool F1 Ultra
20WMaterial used
Rock coasters
74
1376
Information
The F1Ultra embossing function actually cut rock cups? Cut frames and engrave detailed Day of the Dead images
Instruction
1
Step1: Import xcs file
Preview
Turn on the machine, open xTool Creative Space on the computer, drag in the required xcs file, turn on the relief mode, and ignore the red layer. Start processing.
2
Step2: Emboss
Preview
Start embossing and stop processing until the rock coaster is completely carved.
ps:If particles appear during the carving process, you can pause the machine and use a grinder to remove impurity particles, but be careful not to move the position of the rock coaster. After polishing, just keep the original position and continue carving.
3
Step3: Spray paint
Preview
Preview
Spray a light-colored primer first, then cover with dark paint.
4
Step4: Plane mode processing
Preview
After the spray paint is dry, put it into the machine, select the plane processing mode, ignore the green layer, and execute the red layer for image engraving.
Comments
