Trace920

Report

[Laser cut and engrave] Wooden Tissue Box Holder — Project made with xTool S1 machine for Laser cut and engrave.

Wooden Tissue Box Holder

Instruction

9x3.5x4.75TissueBoxCover

.xcs

Application scenario

Laser processing (15min)

Machine & module

xTool S1

20W

Compatibles · 12

Material used

1/8"(3mm) Basswood Plywood

525

2041

Information

      Quick little project to cover up those tissue boxes. No longer do you have to search in vain for that perfectly decorated box of tissue. You can make this and stain it to match whatever room you need a box of tissue in. Hooray!!! Dimensions are 9" x 3.5" x 4.75".

Instruction

Step1: Gather Materials

Gather up what you need for this project. It's pretty minimal, just the stock you are using and some glue.

Step2: Cut Away

Preview

If you haven't done so already, grab the file and open it in XCS. Put your stock in the laser and focus it, then map it. Arrange the pieces so they they fit in the mapped out area.

Check your laser settings. I used an S1 20W machine to cut this out, and your settings may need to be tweaked to cut through the stock you are using. When your ready, process the file, start it, then press the button!

Step3: Assemble

Preview

Carefully assemble the pieces. If you have any flashback, put those on the inside or the box, or wipe them down and lightly sand it. I used Starbond thick to hold it all together.