Wooden Notebook Cover

Make sure that material is stable for cutting. Place the basswood correctly, adjust the settings as needed. Once finished, proceed to the cutting process. In this process, 12x12 inc 3mm basswood material was used. You can place the project according to close capture view camera option. And click process to frame the cutting range.

Don't forget to sand the basswood before gluing the two covers. You can eliminate the bad appearance and burning parts on the cover by sanding it. After sanding, you can glue the two covers.

After sanding and gluing the covers, you can assemble the two cover's holes by using the rope/fabric. After that you can use as a notebook by putting paper in it. Or you can use as a folder. You can use it for many purposes