Report
![[Laser cut and engrave] Baby Dragon and Lion](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4d7c2608-e547-4d7e-abb3-e4b3315d43e8?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Baby Dragon and Lion](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Baby Dragon and Lion
Instructionbaby-lion-and-dragon
.xcs
Show 1 more
Application scenario
Laser processing (60min)
Machine & module
xTool F1 Ultra
20W
xTool D1 Pro
20WMaterial used
1/8"(3mm) Basswood Plywood
171
1170
Instruction
1
Step1: Open in XCS
Preview
Open directly in XTool Creative Space. Now there are only a few things to prepare:
- Adjust the size of the relief to the size of your wooden piece or make your own cutout and put the picture in the center
- Copy the picture and change the greyscale of the second one (see image 1)
- Align the two pictures horizontally and vertically
2
Step2: Engraving
With the two layers from step 2 you will get a deeper relief! Now you can engrave your wooden piece with the settings above. This will take some time (depending on the size you chose) but the result is totally worth it!
Comments
