Report
![[Laser cut and engrave] Wooden plaque with Last Supper engraving decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2bd88393-db17-440d-9c25-fa532e929814?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden plaque with Last Supper engraving decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2bd88393-db17-440d-9c25-fa532e929814?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden plaque with Last Supper engraving decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9a7fc7b1-f12b-41ed-9d4c-e0ad3981ae84.png)
F1 & Slide extension Wooden plaque with Last Supper engraving plus for D1 Pro 20w
Instruction
F1LastSupper
.xcs
Show 1 more
Application scenario
Laser processing (23min)
Machine & module
xTool F1
2W, 10W
xTool D1 Pro
20WCompatibles · 8
Accessories
xTool F1 Slide Extension
Material used
Pine Wood
288
1769
Information
Originally made it on a slate on D1Pro 2 years ago. But decided this time on a sign plate with using F1 and the slide extension. The full tutorial on how to set up the slide extension and the calibration was uploaded to our youtube channel and Udemy. On the project files uploaded both files if you are using the D1 Pro 20w select on lastsupperD1Pro20w.xcs
Instruction
1
Step1: 1st Step install & Calibrate
Preview
Tighten the 2 screws left and right under the slide tray and click calibrate.
2
Step2: Open file and frame
Preview
Turn the knob and the slide will move while framing
3
Step3: Process
Preview
Click the start button.
4
Step4: Complete in 23 min
Preview
The whole video process had been uploaded in Udemy and our youtube channel.
Comments
