Report
![[Laser cut and engrave] Snowflake door corner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3c8a4599-1b8d-493b-ad00-33d5c4c39c25?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Snowflake door corner](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Snowflake door corner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3c8a4599-1b8d-493b-ad00-33d5c4c39c25?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Snowflake door corner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ecbd72e8-1756-475e-a141-25b181690358.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Snowflake door corner
Instruction
snowflakedoorcorner
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool M1
10W
xTool D1 Pro
20WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
732
4297
Instruction
1
Step1: XCS 1v2
Preview
in XCS i created a 90° corner with 2 rectangles
put all snowflakes together as they look good
also made sure that the holes are not too small
2
Step2: XCS 2v2
Preview
put all snowflakes together as they look good
also made sure that the holes are not too small
3
Step3: Laser
Preview
select everything and choose unite
the overhangs are on the inside
click on edit node and remove all protrusions on the reverse side
Comments
