Report
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c4df478f-e5e7-4368-a8c8-ae5053f10f32?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c4df478f-e5e7-4368-a8c8-ae5053f10f32?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/721f0abc-77de-4fff-b2b8-312484c5b670.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6a75ec89-18de-4c0a-9a90-ede051a96775.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser engraved cat illustration on circular glass](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b96fe1f5-dfe1-4288-82a1-4f6e946909ef.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Walle By The Fire - Cat Image on Mirror
Instruction
10w_walleXmasMirror
.xcs
Show 1 more
Application scenario
Laser processing (60min)
Machine & module
xTool S1
10WAccessories
xTool S1 Honeycomb Panel
Material used
Circular Mirror
53
950
Information
[Style] Block printing
[Prompt] an orange and white maincoon kitten with less striping on the head looking at camera with big dialated eyes. it is wearing a chirstmas sweater while the background has a christmas tree and decorations next to a roaring flame at a fireplace
Instruction
1
Step1: Gather Materials and setup
Get 3mm thickness mirror, clean with windex and iso alcohol 99%, flip image horizontally in XCS, and flip mirror on shiny side facing down. I would also recommend inverting the grayscale under the adjust setting. Calibrate the machine and then enter in settings under user defined material
80% power // 200 mm/s // 1 pass // 200 lines per cm
2
Step2: Patiently Wait and enjoy =)
Of course if you have a stronger laser, it may not take as much time but for the 10w it should total to around 53 min engraving time.
After done cutting, I blew with compressed air and then cleaned with windex again. Results of these same steps are above.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.