Report
![[Laser cut and engrave] Engraved wooden art with deer in forest scene](https://storage-us.atomm.com/resource/xart/result/218859/48b23615-9025-4a36-85af-43d5c12f0259.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Deer Live Edge Engraving
Instruction
deerlargeboard
.xcs
Show 1 more
Application scenario
Laser processing (70min)
Machine & module
xTool S1
20WCompatibles · 12
Accessories
xTool S1 Honeycomb Panel
xTool S1 Riser Base
Material used
1/8"(3mm) Basswood Plywood
193
1109
Information
[Style] Block printing
[Prompt] high definition, 3 bucks in field with wooded background, pine trees, indiana
Instruction
1
Step1
Easy to run project. This was ran with a 20w laser at 70% power 200 speed. This live edge board can be found at Hobby Lobby for under 10 dollars. Finish with a few thin coats of poly for best results.
2
Step2
Place material onto the honeycomb
3
Step3
Auto measure the distance for you material
4
Step4
Mark your working area with the rectangle option, I marked area just inside the actual live edge
5
Step5
Verify the correct settings for your machine. I used a 20W set at 70% and 200 speed.
6
Step6
Run the project, this one takes a while so be patient
7
Step7
Remove the finished project from the machine and finish off with a couple of light coats of clear poly.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.