Report
![[Laser cut and engrave] Wood engraving of a fish jumping out of water](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8f337d53-9bbf-4b69-ab25-c725730301d8?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wood engraving of a fish jumping out of water](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wood engraving of a fish jumping out of water](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8f337d53-9bbf-4b69-ab25-c725730301d8?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wood engraving of a fish jumping out of water](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/23499824-8865-4a87-8ed3-d63275f5b728.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Largemouth Bass Wooden Plaque
Instruction
Bass
.xcs
Show 2 more
Application scenario
Laser processing (22min)
Machine & module
xTool S1
20WMaterial used
Planed Willow Round
409
1802
Instruction
1
Step1
Step 1 place Willow live edge on the honeycomb tray
2
Step2
Mark your distance using the auto-measure feature
3
Step3
Mark your working area using the multipoint selection, I followed about 1 inch inside the entire working area
4
Step4
Import the file or SVG and resize it as needed for your material
5
Step5
Adjust settings to desired power/speed. I used 60 power and 120 speed with a 20 W laser
6
Step6
Run the project- usually around 20 minutes time dependig on speed and size of board.
7
Step7
Finish with a light coat of mineral oil or clear coat to make the engraving really stand out
8
Step8
Gift this to your favorite fisherman
Comments
Remixes
xTool Supplies Used in This Project
Related collections
Related tags
License
This work contains AI-generated content.