Funny Magnets 7 - O1 Edition

So this is my last batch of magnets for this run. I really enjoyed making and sharing these. I do have other magnets but they do not fall in the realm of humerous and so I will share those later under a different label. 

NOTE: The image shows these on a different style of ceramic magnet that is unlike the others. However they were still gotten from xTool. In the Bill of Materials, I show the round magnets as they do not have the odd shaped ones shown listed but they are still useable with these designs.

As with the rest, there are a few notes here even though they are very simple to do. 

FIrst, since the ceramic magnets are already white, you do not need to print white. Be sure to turn that off in the settings on the right by selecting the image and then selecting the ink mode, changing it from White + Color to Color

Second, be sure to sharpen it with adjustments and increase the brightness by a point or two. This will help to bring out the color better imo.

Third, unlike the other magnets I have done, I added a layer of varnish and liked how it turned out. It added a slight sheen to the magnets that made them pop a little more. So I changed it from just color to color + varnish.

Finally, if using this on a different magnet type, adjust the settings accordingly. For example, if on a non white surface, have your ink mode be White + Color.