Report

Mini Jack O’Lanterns

ID 228337
Instruction
Files
Original files
AuthorF2 · 1/8"(3mm) Basswood Plywood
1
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
51
723

Information

      These Mini Jack O’Lanterns are small layered wooden Halloween decorations made from two pieces of plywood.
    

Instruction

1

Step1: Choose Your Jack O’Lantern

Each Mini Jack O’Lantern design is provided on a separate canvas.

Choose the design you would like to make. 

You can resize these to your prepfered size before Before cutting

Resize the entire design together so that the front face and backing remain exactly the same size.

Do not resize the face and backing separately, as they need to line up when assembled.

2

Step2: Separate the Two Cuts

Once you are happy with the size, separate the design into its two cutting parts:

BLACK = BACKING

This is the solid pumpkin shape that sits behind the face.

RED = FRONT FACE

This is the detailed pumpkin face that sits on top of the backing.

You will need two pieces of plywood – one for the backing and one for the front.

 

 

3

Step3: Cut the Backing

First, hide or remove the red/front-face cut from your cutting area.

Leave only the black backing cut visible.

Send the backing to your cutting machine and cut it from one piece of plywood.

This creates the solid pumpkin-shaped backing.

4

Step4: Cut the Front Face

Next, hide or remove the black/backing cut.

Leave only the red/front-face design visible.

Cut this from a second piece of plywood.

This creates the detailed front of your Jack O’Lantern.

You should now have:

1 × wooden backing
1 × wooden front face

5

Step5: Paint Your Pieces

Paint the two pieces in whatever colours you wish.

For the traditional Halloween look:

  • Backing: Black
  • Front face: Orange

You can also get creative and use any colours you like.

Allow the paint to dry completely before assembling the pieces.

6

Step6: Assemble

Once both pieces are completely dry, place the front face over the backing.

Line up the edges carefully so that the two pieces sit neatly together.

The black backing will show through the eyes, nose, mouth and other cut-out areas, giving your Jack O’Lantern its finished layered look.

Glue the pieces together if you want a permanent decoration.

7

Step7: Seal With Wax

Once the assembled Jack O’Lantern is completely dry, apply a suitable wood wax over the finished piece.

Allow the wax to dry and buff if required.

The wax helps seal and protect the painted wood and gives your Mini Jack O’Lantern a lovely finished appearance.

Comments

Remixes