Report
![[Laser cut and engrave] COPA GRABADA CRISTAL](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/97e36430-1195-4a45-8dcb-9863e9baefa6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] COPA GRABADA CRISTAL](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] COPA GRABADA CRISTAL](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/97e36430-1195-4a45-8dcb-9863e9baefa6?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] COPA GRABADA CRISTAL](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/00d2bc79-6110-47f9-8f7a-5d90b6c9549d.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
COPA GRABADA CRISTAL
Instruction
todaunavidaviviendodelaire
.xcs
Application scenario
Laser processing (8min)
Machine & module
xTool P2
55WAccessories
xTool RA2 Pro for P2/S1/F1
Material used
Cup
Crystal
95
1963
Instruction
1
Step1
Measure the diameter of the cup, it is very important so that the engraving is well and not distorted.
2
Step2
Preview
Preview
Measure with the ruler that entered the kit to know the tray in which you have to put the cup
3
Step3
Put a small white sticker so that it takes your measurement, being transparent would give you failure. (It is also very important, so that the engraving marks you well, and does not lose details.
The configuration that I indicate is as it is in the photo, after trying a lot... Maybe if the cup is thinner, increase speed to 20
Comments
Remixes
License
This work contains AI-generated content.