Christmas Tree Ornaments with Bear

Instruction

ChristmasTreeOrnamentswithBear

.xcs

Show 1 more

Application scenario

Laser processing (30min)

Machine & module

xTool S1

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

334

1911

Information

      Add a touch of festive elegance to your holiday decorations with this beautifully crafted set of Christmas ornaments! This laser-cut file enables you to create a collection of intricate wooden ornaments, each designed with classic Christmas motifs and patterns. Perfect for hanging on the tree, decorating around the home, or adding to holiday gifts, these ornaments bring warmth and tradition to any setting. Easy to cut and assemble, this set is ideal for those looking to enhance their holiday décor with timeless charm and handcrafted detail.

ABOUT THE FINISHED PRODUCT:
CHRISTMAS ORNAMENT multilayer layout size (finished product): 3,6 x 4,4 in.
You can easily change the size of the product.
Number of layers: 3.
!!! This design has engraving!!!
Recommended material - Plywood, MDF, Acrylic, Plexiglas, Metal, Cardboard, Paper.
Recommended Material Thickness for Wood - 3 - 6 mm (1 / 12in - 1 / 4in).

For your convenience, the downloadable zip folder contains files of different formats such as: .AI, .SVG, .DXF, .DWG, .CDR, .EPS, .PDF and .XCS formats.

Instruction

Step1: Using xTool Creative Space Preview

Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

RED LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the red layer (this layer contains the path for engraving).
Set the processing type of the red layer to Engrave.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 60)
Set Speed (S1-20w: 180)
Set Number of Passes (S1-20w: 1)
Line per cm (S1-20w: 120)

BLACK LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the black layer (this layer contains the path for cutting).
Set the processing type of the black layer to Cut.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 100)
Set Speed (S1-20w: 5)
Set Number of Passes (S1-20w: 1)