Report
![[Laser cut and engrave] Pumpkin photo magnet](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f74265cd-ce30-420f-8cdc-08bec1d35afb.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Pumpkin photo magnet](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Pumpkin photo magnet
InstructionPumpkinPhotoFrame
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
4
398
Instruction
1
Step1: Open file and cut pieces
Preview
- Place your board inside your machine
- Auto measure
- Go to Process
2
Step2: Paint & Assembly
Preview
Preview
- Paint your pumpkin.
- I used some paint pens here.
- Glue your half pumpkin on top of the solid piece making sure its flush at the bottom
- Glue your top piece (the one with the hole) on top of those pieces the solid piece being in the back.
- Glue your magnet on back
3
Step3: Add your photo
Preview
Preview
- Slide a photo inside and place on a metal surface!
Comments
