Report
![[Laser cut and engrave,Inkjet printing,Blade cut] Wooden pet memorial with wings and heart photo frame](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b65c751d-92e4-4e50-bd7c-01e6b171befc.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden pet memorial with wings and heart photo frame
Instruction
memorialornament
.xcs
Application scenario
Laser processing、Inkjet printing、Blade cut
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
37
456
Instruction
1
Step1: Cut out wings
Preview
- Start by cutting out only the wings piece and heart
- Change the text to customize your project
2
Step2: Insert & Print image
Preview
Preview
Preview
Preview
- Bring your image into XCS
- Create a mask inside the heart
- Bring the heart over your image
- Select both heart and image and click “create mask” at the top
- Position image as your choose
- Print your image on your sticker vinyl paper
- When it done DO NOT MOVE
- Add your blade
- change your module to blade cut
- send your the blade cut to the machine
3
Step3: Assembly
Preview
Preview
Preview
- Peel the backing off the photo and stick in on the heart making sure its all flush.
- Glue the heart on the ornament between the wings
- hang it up on tree or give as a gift
Comments
