Report
![[Laser cut and engrave,Inkjet printing] Christmas Frame standee](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8fbebbad-2ab5-47ed-a6da-83bc788edc4e.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,Inkjet printing] Christmas Frame standee](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Christmas Frame standee
InstructionChristmasFrameStandee
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
35
565
Information
Instruction
1
Step1: Open File in XCS
Preview
- Open in the file in XCS
- Optional:
- I have used my inkjet module to add some christmas gnome to this frame. You can do this as well if you have an M1 Ultra
- If not, you can skip this part or add anything else you might want.
2
Step2: Laser
Preview
Automeasure your material and send to laser
3
Step3: Assembly
Preview
Preview
- Glue the thinner frame on top of the solid piece
- Glue the frame with the engraving on top of those two pieces
- If you printed some christmas flare glue those to your frame as well.
- I finished this by spraying some modge podge on my frame.
Comments
