Report
![[Laser cut and engrave,Inkjet printing] Ghost earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2ce79407-c5cd-459b-8caa-dd4e73f915c4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave,Inkjet printing] Ghost earrings](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Ghost earrings
InstructionGhostEarrings
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
14
534
Information
Celebrate spooky season with these cute stud earrings.
Instruction
1
Step1: Prep your material
Preview
- Start out by sanding your wood very well.
- In order for your print to come out well on wood you will need to prime with the a clear coat.
- For this project. I used modge podge spray.
2
Step2: Printing & Lasering
Preview
- Place your wood inside your machine
- Make sure you are in the inkjet printing setting in processing mode
- Print your image.
- Once it's done DO NOT MOVE your material
- replace the inkjet module with the laser module
- Change your module mode to lasering on flat surface
- Click Go to Process
3
Step3: Assembly
Preview
Preview
Preview
Preview
Optional step
- To seal your earrings you can add some uv resin on top
- Painted the back of these earrings with a black paint pen before adding the backings with resin.
Comments
