Report
![[Laser cut and engrave] Winter coasters](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ce25a923-018b-4ee9-9de8-deff53a7dcac?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Winter coasters
Instruction
wintercoaster
.xcs
Application scenario
Laser processing
Machine & module
xTool P2
55WMaterial used
1/8"(3mm) Cherry Plywood
46
365
Information
Instruction
1
Step1: Step 1 to engrave
Preview
To make the engrave coaster.
First select the cut version and select it to hid so that it will not cut.
2
Step2: Step 2
Preview
Next, place the design over the material you are using for the project using the camera on the laser.
Process the design and the project is finished.
3
Step3: To make the cut version
Preview
To start, hightlight the engraved coaster, set it to ignore.
Then highlight the cut coaster and set it to output.
4
Step4: Process
Preview
Next, place the cut design over the4 material you are using. The camera on the laser will help you do this.
Once it is in place you can process the design.
Remove from the laser and the design is finished.
Comments
