Wind Chimes

Import the file into the XCS software, put the wind chime in the center of the machine. Adjust the height of the laser to focus, connect the device and framing to ensure that the pattern is in the center of the wind chime and engrave it.

Take out the engraved wind chimes and wipe the surface so that you can get a unique wind chime.

Carve a unique pattern on the wind chimes and feel the melody which brought by the unique wind chimes.

Note

1.It shoule be put the engraving pattern in the center of the machine.

2.You can wipe the wind chimes with alchol after the carving to avoid become yellow.