Report
![[Laser cut and engrave] Teardrop earring with gold acrylic inlay](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d915807c-f690-4cb0-90b5-f1dbb9514916?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Teardrop earring with gold acrylic inlay](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Teardrop earring with gold acrylic inlay
Instructionteardrop-black-gold
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool P2
55WCompatibles · 2
Accessories
xTool P2 Honeycomb Panel
Material used
1/8"(3mm) Black MDF Board
87
834
Information
This teardrop earring made of wood has gold acrylic inlays. Make it without using glue.
Instruction
1
Step1: Cut out the parts
Preview
- Cut out the parts.
- Please note that the acrylic inlay used a kerf of 0.16 so that the acrylic parts can be clicked into the earring without using glue.
2
Step2: Assemble the earrings
Preview
Preview
Preview
2 More images
- When cutting the earrings we have some charring. We clean this with Isoproponal alcohol.
- You have cut out 6 small pieces of acrylic inlay. These fit into the holes of the earring. Use tweezers. You have to press the piece of acrylic into the holes with a little pressure, then they will be snuck fit.
- Use 1 ring through the hanging eye of the earring and place a second one. Attach the second eye to the earring hook.
Comments
