Report
![[Laser cut and engrave] Wooden Christmas Door Decorations](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/186306f9-34f1-4650-bce5-e8717ca72c89?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Christmas Door Decorations
Instruction
ChristmasDoorDecorations
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2
55WMaterial used
3mm Walnut Plywood
125
2080
Information
We welcome every visitor with the warmest of hearts and hope that our home will bring you a touch of warmth and joy. This Christmas, let's share love and spread happiness together, starting from this small doorplate! May it become a bridge connecting each other's hearts and let the happiness fill every space, come and create it together!
Instruction
1
Step1: Import the XCS file
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
P2
processing type：cut
power: 100
speed: 16
pass: 1
2
Step2: Apply the masking tape
.png?x-oss-process=image/resize,m_fill,w_800,h_600,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
Preview
Before starting to cut the board, we can paste a layer of paper on the surface of the board to prevent carbonized dust from sticking to the surface of the board.
3
Step3: Laser cutting
.jpg?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
Put the wooden boards into the machine separately, refresh the page, click on the distance measurement, adjust the position of the pattern, and cut the pattern.
processing type：cut
power: 100
speed: 16
pass: 1
4
Step4: Clean the masking tape
.png?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
After cutting, carefully remove the parts and clean the masking paper on the surface of the parts
5
Step5: Apply wood wax oil
.png?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
The cut wood parts of the stacked ornaments are coated with wood wax oil
6
Step6: Assemble
Preview
Assemble the cut wooden parts of the pendulum separately.
Thus you have finished assembling the wooden Christmasornament, place him in your home for decoration!
Comments
