Report
![[Laser cut and engrave] Oval box, easy cut.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f3545d59-b1bf-4dad-9225-c104b31750dc?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Oval box, easy cut.](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Oval box, easy cut.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f3545d59-b1bf-4dad-9225-c104b31750dc?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Oval box, easy cut.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9af39b9c-b05f-4f9d-817a-d772c0e7ac61/2.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Oval box, easy cut.
Instruction
ovalboxfull
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1 Ultra
20WCompatibles · 14
Material used
1/8"(3mm) Walnut Plywood
145
1303
Information
Its an easy to lasercut box in an oval shape. I made it with the xtool walnut plywood. You can download the XCS file below.
Instruction
1
Step1
Easy to cut oval bo, very high quality design.
3 pieces, 2 pieces for the sides and the longest part is for the oval shape.
Before assembling the parts its important to use a little bit of glue on each side where the different parts touch.
Comments
