Report

[Laser cut and engrave] Halloween Light Box with Death — Project made with S1 machine for Halloween.

Halloween Light Box with Death

Instruction

WindowsHalloweenLantern2

.xcs

Application scenario

Laser processing (30min)

Machine & module

xTool S1

20W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Basswood Plywood

264

3865

Information

      Infuse your Halloween decor with an element of foreboding mystery using this laser-cut Grim Reaper lantern. The menacing silhouette of Death, complete with a scythe, adds an ominous presence to any space. Place it around your home or hang it on your wall to welcome guests into your own little house of horrors.

Key Features:
3-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Material width required for this project is 3mm.
Perfect for both beginners and experienced makers.

Download this design and start creating spooky Halloween Candle Holder!

Instruction

Step1: Using xTool Creative Space

Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

BLACK LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the black layer (this layer contains the path for cutting).
Set the processing type of the black layer to Cut.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 100)
Set Speed (S1-20w: 5)
Set Number of Passes (S1-20w: 1)