HomeLaser&Cut ProjectsHome DecorWall Art
mtstate.jh
mtstate.jh
Report
[Laser cut and engrave] the last supper
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] the last supper
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] the last supper
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] the last supper
[Laser cut and engrave] the last supper
[Laser cut and engrave] the last supper
[Laser cut and engrave] the last supper
[Laser cut and engrave] the last supper
[Laser cut and engrave] the last supper

the last supper

Instruction
last supper 1.jpg
last supper 1
.jpg
Application scenario
Laser (1min)
Machine & module
xTool D1 Pro
10W
Material used
1/8"(3mm) Cherry Plywood
Wood
3mm Basswood Plywood
gift
3396
32828

Information

      this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look
last supper
rustic

Instruction

1

Step1

this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look 

Comments

Remixes