"Floating The Future" IFA Display Sign Magnetically Suspended

1.  You will need the following
   1.  (1) Sheet of 12"x12" Bass Plywood
   2.  (1) Piece of thin thread
   3.  (2) ¼" Magnets (can be purchased online)
   4.   Paint and glue (Your choice)

https://www.facebook.com/share/v/1JHudmRKa9/

1.  First Cutout the parts
2.  Next Paint the parts as you like
3.  Engrave the parts as shown above

1.  Add the magnets as shown above
2.  Add the thread to the bottom of the display
3.  Pass the thread through the hole in the base
4.  Adjust the thread so the display is held up by the magnets (But not touching)
5.  Secure the thread using tape or a clamp
6.  Glue the thread to the base (This is the only hard part)

Have Fun…