Rose personnalisée avec prénom en bois / Personalized wooden rose with name

Prepare

the materials to be cut according to your needs and desires

I used the settings recommended by xTool for the materials but you can use your own settings according to your test grids and your needs,I

installed the honeycomb panel to let the air circulate under the wood and I turned on the air assist and the duct fan to limit the burn marks as much as possible,

Start the cutting and watch the laser do its magic!

I used the settings recommended by xTool for the materials, but you can use your own settings according to your test grids and needs,I

installed the honeycomb panel to let the air circulate under the wood, and turned on the air assist and duct fan to keep burn marks to a minimum,Start

cutting and watch the laser work its magic!

I used liquid wood glue to glue the wooden planks together.

Once finished, you can admire the result!

I hope this gift will be very popular and that it will make a beautiful decoration!

I used liquid wood glue to glue the planks together.

Once finished, you can admire the result!

I hope you'll enjoy this gift and that it will make a lovely decoration!