Report
![[Laser cut and engrave] Soot Sprite Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/aeef593e-1a7d-4638-9458-e31c317b58b3?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Soot Sprite Earrings](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Soot Sprite Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/aeef593e-1a7d-4638-9458-e31c317b58b3?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Soot Sprite Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/282832a5-4e0f-44b0-9dc7-82dd2f584f46/B6B07205-45E3-40F5-9CC0-B4686EB7917C.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Soot Sprite Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2a4f93f0-9029-4917-9dc2-0726f761abd9/428878F0-FFF2-40FD-A335-250C593C85C0.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Soot Sprite Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/525ca063-c59d-4356-b3e8-fc2cea360b10/11BFB654-60D5-41FB-BF72-635B975C29D4.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Soot Sprite Earrings
Instruction
SootSpritexToolComp
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool D1 Pro
20WCompatibles · 9
Material used
1/8"(3mm) Pine Ponderosa Plywood
50
956
Information
Fun and colourful, these soot sprite or susuwatari earrings inspired by the movie 'Spirited Away' will bring a bit of whimsy into your life!
Instruction
1
Step1: Cut wood
Using the xcs file provided, engrave and cut the wood. For engraving, I like to set my parameters to 75% power and 250 speed.
2
Step2: Paint the wood
Paint the wood your desired colours.
3
Step3: Assemble
Attach a stainless steel stud back to one of the stars and the sprite with one connecting hole. Then, assemble your earrings with jump rings. I find that 5mm and above works best for jump rings.
Comments
